Does your home have wood walls, is it a log home; you need to be really careful. Wood stains are a serious issue, no matter, how you keep your carpet. The biggest problem is you cannot prevent the wood stains from reaching your carpet. There is a need to treat the wood, if not it will damage the carpet, demanding replacement of the carpet. Find yourself how to remove wood stains from carpet.
The correct step is to ensure you clean the spills immediately before they transform into a big issue. However, there may be stubborn stains that fail to be immediately treated. If so, they will cause profound damage by asking replacement of the carpet. It is time to understand ways to remove wood stains from carpets.
Different types of wood stain
Wood stain is a paint type applied to the wood. It promotes the bare wood’s natural colors. Stains are in several types and are a threat to carpets. Knowing the exact stain type helps in dealing with it. It is easy to handle the carpet stains if you know the stain removal method.
The different wood stain types are:
- Oil-based wood stain
- Water-based wood stain
- Non-grain raising wood stain
- Spirit-based wood stain
- Wood flooring stain
- Furniture legs stain on the carpet
General ways of removing wood stains
Steam Clean
A steam cleaner is useful for stained areas. Renting from different locations is also possible such as the department or grocery stores, or repair shops. Steam cleaning helps loosen particles and it pulls out the stains. It is less effective when the stain is sitting for than longer time. Longer stain means it requires more steam cleaning sessions.
Stain Remover
Cleaning wood stains is possible using carpet stain remover. The results vary as per the stain types. However, test the stain remover on the carpet corner in a small area, to ascertain no discoloration.
It will resolve the first step to proceed to how to remove wood stains from the carpet. As the next step, allow the stain remover to soak for 10 minutes in the carpet on the stain area, and later to clean using a wet, warm cloth.
Cleaning using chemicals
Steam cleaning and letting it dry helps. You may apply chemicals after it dries. Remember to wear goggles and gloves while using chemicals. Apply on a cloth acetone and blot the stain. You may use WD-40 or lacquer thinner to loosen the stain.
Use a clean paper or cloth towel, and clean the area. Depending on the stain type and the time length it is on the carpet, the cleaning steps may vary.
Tips on how to remove wood stains from carpet
-
Vinegar and Baking Soda
A combination of vinegar and baking soda is widely known and a popular antibacterial agent. It is ideal for stain removal. Adding vinegar to baking soda a few drops and spraying on the stained surface helps. Alternatively, you can rub the solution using a toothbrush. Wipe it clean using a damp cloth, after a while. Later, allow the carpet area to dry.
-
WD-40
WD- is an excellent and powerful cleaning solution for the carpet. It breaks oily stains. Spray WD-40 on the stain directly and let it absorb the solution. Later use a dry towel and blot the stain. Avoid rubbing the stain, if not, it will become a daunting task to remove from the carpet.
-
Detergent
Detergent is more effective and less harmful. It removes water-based stains on the carpet, resolving the question of how to remove wood stains from the carpet. You may prepare by taking lukewarm water 2 cups and liquid detergent one teaspoon. Apply directly on the stain area as a spray and let it sit for 20 minutes. Followed by it, blot the surface using a clean paper towel or soft cotton pad. Dry the surface, and enjoy the result.
-
Hydrogen Peroxide
An effective remover of stains is Hydrogen peroxide. It requires a combination of 3% hydrogen peroxide and warm water in the same volume. Dip cotton or a cloth into the mixture and apply to the affected area. Leave it for 24 hours and wash it away.
Alternatively, you can mix hydrogen peroxide two tablespoons into a dish soap and store it in a bottle. Check the stained surface and apply the solution for a few seconds and consider scrubbing. Use a towel and cover the area.
-
Mineral Spirits
A great option is Mineral spirit to dispel wood stains, particularly oil-based wood stains. Mineral spirit is available at any paint or hardware store. It does not harm the carpet, if you do not pour on it directly. Use some cotton or a cloth to apply the mineral spirit and dab or blot the spot. Finally, take a clean, dry white cloth and absorb the spot till dry.
-
Alcohol
Alcohol is an amazing stain remover. It quickly dissolves the stain from the carpet. You may apply alcohol using a towel and gently rub. Bear in mind, never use alcohol on rayon, silk, wool, or acetate carpet varieties.
-
De-Solv-Liquid
The de-solve liquid is effective in removing stains from carpets. Spray lightly on a damp white, clean washcloth, and let it sit for 15 minutes and scrub it. Use a clean soft cloth and blot the area clean.
-
Ammonia Solution
Remove ugly stains using an Ammonia solution. It is a great solution to eliminate wood stains from carpets. You may mix liquid dishwashing detergent liquid one teaspoon with ammonia one quart in lukewarm water around two cups. Use a cloth or sponge to dip into the solution and rub on the stain. Blot from outside and rinse the carpet. However, keep blotting until you get the stain removed wholly.
Note: Using ammonia solution is appropriate as you are certain the detergent has no bleach. It is a must to confirm the solution is bleach-free so that the carpet color does not fade or ruin.
Conclusion
It is common to get frustrated on seeing stains on your carpet. The pain is because you have no idea about how to remove wood stains from the carpet. At the same time, you cannot imagine throwing away your favorite carpet for having stubborn stains.
Fortunately, you can look for solutions to disappear the stubborn stains cost-effectively. There is no need to look or call cleaning services.